Gomaco 3300 slipform paver
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 4323 8...
Show
+49 4323 802527
+49 4323 80...
Show
+49 4323 8025170
+49 172 42...
Show
+49 172 4222113
+49 179 60...
Show
+49 179 6069650
Germany 
Germany
Germany
Ukraine, Chernivtsi Ob'izna
USA, Miami
United Kingdom, Billingham
Netherlands, Haps
Netherlands, Asten
Germany, Selfkant
China, Shanghai
USA, Miami
Portugal
Spain, Chiva
USA, Miami
USA, Miami
Georgia, Tbilisi
China, Shanghai
Greece, Athens, Gr19011
USA, Miami
USA, Miami
USA, Miami
Year of manufacture: 2019
Serial number: 903100-362
Working hours: ~420 hours
Three-legged machine with a paving width of up to 3.5m full area
Paving in transport position and transverse
Incl. 3 pieces of farm tracks screeds up to 3.5m with vibrators
Engine: C3.4B diesel engine, Caterpillar- 120hp (93.3kW). Tier 4
Fuel tank, capacity: 265 liters
Hydraulic oil tank, capacity: 336.9 liters
Oil cooler
Eight hydraulic circuits
Automatic on/off switch for vibrators
- Synchronized with the machine movement
Hydraulic pump system
Fiberglass engine and control panel enclosure
- Improved visibility of the operator
- Better access to engine, pumps and valves
Operator station for left and right
- designed for easy monitoring of all hydraulic controls and electronic censoring functions as well as remote control of travel speed
G+ control panel and G+ Connect:
GOMACO's proprietary operating system - Handling is very user-friendly and easy to learn
- Self-diagnostic system with 165 mm (6.5 inch) anti-glare color and graphic display
- Pulse sensors in the crawler motors enable precise speed and distance measurement with various attachments.
- Detailed machine history
- 3D concreting systems are recognized immediately, which enables simple interface integration. Installation with 3D operating system is immediately recognized by the G+ system through intelligent interface integration
- Operating software can be operated in several languages
- e.g. English / German
GRD (Gomaco Remote Diagnostic System)
- Enables service personnel to access and check configuration parameters for fault diagnosis
- Remote setting of devices via GPS
- Transmission of GSI real-time data for optimum control of machine performance
- Notifications by e-mail on request
- Software updates
- Two-year license
Three mounted lifting legs
- with 914mm lifting cylinder
- 203mm manual adjustment
- 1,116mm total vertical adjustment
- with 180゜changeable drive
- Electronic rotation sensors for accurate track feedback
Hydraulic rear leg shift
- Power Slide for rear track positioning with intelligent cylinder to assist correct steering angle over the radius
- 1803mm side track movement for optimum machine balance.
Very stable front mold support left and right
frame
- right leg positioning:
- 422mm lateral hydraulic movement from outside to straight ahead
- 914mm lateral movement
- either left or right for kerb and gutter, barrier, slot drain, water channel, sidewalk
Hook & Go pull bar and additional bracket
- 457 mm pressure-compensated hydraulic height adjustment
and 660 mm manual height adjustment
- Total vertical adjustment 1117 mm
- 914 mm maximum hydraulic lateral adjustment
- With smart telescopic mold holder for repeatable mold changes
NOTE: A screed with a width of up to 2.5 m can be mounted on the right or left side of the standard 3300.
Mounted, foldable conveyor belt
- Hydraulically driven
- 5.64m between the central deflection rollers
- 610mm wide, vulcanized conveyor belt
- Variable speed regulation
- Lateral swivel bracket with hydraulic adjustment of the loading height
- hydraulic sideshift for the left or right side
- Hydraulic bracket for the standard auger conveyor
- vulcanized
- Conveyor belt protection
Emergency stop switch
Three crawler tracks - Series 1 with two-stage hydraulic motors
- Hydraulically driven with automatic tensioning
- Length 1.56m
- 300mm wide pads with road plates
- 100:1 reduction ratio
- Pave speed 0 to 15.1 mpm
- additional movement 0-40 mpm
Polyurethane trackpads
- 1 set
Hydraulic rotation drives
- with 180゜changing drive
- with electronic rotation sensors for accurate track feedback
High pressure water system
- Including 416 liter tank, adjustable high-pressure gun
- Pressure regulation from 0 to 140 bar
Lighting system for night operation
- Includes 4 LED lights, 9-32 V DC voltage, incl. attachment
The scope of delivery includes three paving molds:
1. Variable Farmway/ -road mold (year of manufacture: 2021)
Adjustment of track width and gap from outside to inside.
(Permanent total width of the mold: 3868mm; track width from 1000-1300mm;
intermediate track width of 800-1000mm)
- A transverse auger mounted on the hopper and driven by a chain
driven by a chain; drive unit without reduction gear.
- The concrete is fed into the hopper by means of the GT3300 conveyor belt.
- To achieve the different concrete strips with paving width, this requires
manual adjustment of the respective paving/track dimensions.
- Individual manual adjustment of the paving thickness of the tracks from at least
140 mm - 240 mm; stroke adjustment +80 / - 20 mm.
- Shape assembly and suspension in transport position included.
- Hydraulically operated - pressure-compensated side formwork
- 4 VIBRATORS included in the scope of delivery
(Straight design, almost unused/very little used)