Platarg 712 stamping press
Niederhelfenschwil
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+34 937 64 ...
Show
+34 937 64 96 80
Switzerland, Niederhelfenschwil
Switzerland, Niederhelfenschwil
Switzerland, Niederhelfenschwil
Switzerland, Niederhelfenschwil
Switzerland, Niederhelfenschwil
Switzerland, Niederhelfenschwil
Switzerland, Niederhelfenschwil
Switzerland, Niederhelfenschwil
- Stations 12
- Station distance 82.55 mm
- max. strip width 90 mm
- max. strip thickness 1.63 mm
- max. blank diameter 52 mm (standard) 44 mm (zig-zag)
- min. blank diameter 20 mm
- max. amount of multiple segments 2
- max. pull height 25 mm
- max. pull stamp diameter 32.5 mm
- Stroke 150 mm
Currently Press not in operation,
can be shown in idle running condition
Documentation available;
2-fold operating instructions and mech.
1 for the control unit
Horizontal transfer mech cam cam-controlled;
Belt feed ZIG ZAG mech cam cam-controlled;
Ejector mech cam cam-controlled, pull-back with springs;
Operation manual available
Double Decoiler
Type BRH4
Load Capacity 300 kg
Stripwidth 300 mm
YOM 1983
Technical details of the machine below:
- Stations 12
- Station distance 82.55 mm
- max. strip width 90 mm
- max. strip thickness 1.63 mm
- max. blank diameter 52 mm (standard) 44 mm (zig-zag)
- min. blank diameter 20 mm
- max. amount of multiple segments 2
- max. pull height 25 mm
- max. pull stamp diameter 32.5 mm
- Stroke 150 mm
Currently Press not in operation,
can be shown in idle running condition
Documentation available;
2-fold operating instructions and mech.
1 for the control unit
Horizontal transfer mech cam cam-controlled;
Belt feed ZIG ZAG mech cam cam-controlled;
Ejector mech cam cam-controlled, pull-back with springs;
Operation manual available
Double Decoiler
Type BRH4
Load Capacity 300 kg
Stripwidth 300 mm
YOM 1983
Press Design
drive system: eccentric / crank
openings in uprights: no
number of slide actions: 7
table cushion: no
quick die change system: no
Press forces
total force (nominal): 60 to
Slide
stroke: 150 mm
stroke rate (max.): 200 /min
slide (mechan. Press)
slide adjustment: 5 mm
stroke rate (min.): 70 /min
stroke rate (max.): 200 /min
Tool Assembly Dimensions
shut height (stroke down, adjustment up), BDC: 127 mm
Decoiler
design: twin reel
sheet width (min): 90 mm
Strip-Feeder
feeder type: roll feeder
Electrical specifications
total power consumption: 18.5 kW
mains voltage: 415 V
mains frequency: 50 Hz
Dimensions / weights
space requirements -left/right-: 4000 mm
space requirements -front/back-: 2000 mm
total height: 3000 mm
total weight approx.: 8000 kg
Attachments (presses)
2-hand engagement: yes
noise protection cabin: yes
acc. to actual accident protection regulation: yes