EHT EASYPRESS 85-20 press brake
Ahaus6623 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 2561 9...
Show
+49 2561 938471
+49 2561 9...
Show
+49 2561 938436
Germany 
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Guenzburg
Germany, Guenzburg
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Guenzburg
Germany, Guenzburg
Germany, Guenzburg
50 Hz
Germany, Pullach
Germany, Ahaus
Germany, Guenzburg
Germany, Ahaus
Germany, Ahaus
Germany, Niederlangen
chamfer lenght 2050 mm
distance between columns 1650 mm
column arm 400 mm
stroke 240 mm
dayligth 320 - 560 mm
ajustment speed 150 mm/sec
working feed 15.0 mm/sec
return speed 150 mm/sec
back stop - adjustable 5.0 - 1000 mm
table width 110 mm
work height max. 1050 mm
operating pressure max. 297 bar
compressed air 4.5 - 6.0 bar
oil volume 200 l
operating pressure 340 bar
total power requirement 7.5 kW
weight of the machine ca. 5900 kg
range L-W-H 4100 x 2100 x 2750 mm
** with increased installation height / piston stroke
** well-maintained condition (!!)
Equipment:
- CNC electro-hydraulic press brake
- including CYBELEC CNC control
* swiveling control panel at the front right
* external screen
- CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning
- CNC electro-motorized back stop (X axis)
* Travel range .. 5.0 - 1,000 mm
* Travel speed .. 250 mm/sec.
- CNC electro-motorized height adjustment of the back stop (R axis)
* Travel range .. 70 - 235 mm
* Travel speed .. 100 mm/sec.
- CNC electro-motoric adjustment of the stop fingers (Z axes)
* Travel range Z1 .. 405 - 1.565 mm
* Travel speed .. 1.000 mm/sec.
* Travel range Z2 .. 485 - 1.645 mm
* Travel speed .. 1.000 mm/sec.
- CNC electro-motoric table crowning
- CNC pneumatic die displacement (I axis)
- EHT pneumatic tool clamping - upper tool
- EHT manual tool clamping - lower tool
* Tool holder 90.0 mm + 13.0 mm possible
- 1x freely movable 2-hand/foot control
- 2x front, stable support arms including "sliding system"
- side protective device (swinging doors)
- rear protective device (swinging door)
- original operating instructions + circuit diagram etc.
* Special accessories included:
- Oil cooler for use in continuous operation
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hub 240 mm
Zustellgeschwindigkeit 150 mm/sec
Arbeitsgeschwindigkeit 15.0 mm/sec
Hinteranschlag - verstellbar 5.0 - 1000 mm
Tischbreite 110 mm
Betriebsdruck max. 297 bar
Druckluft 4.5 - 6.0 bar
Betriebsdruck 340 bar
Gesamtleistungsbedarf 7.5 kW
Maschinengewicht ca. 5900 kg
Abmessung L-B-H 4100 x 2100 x 2750 mm