Amada FLW 4000 M3 fiber laser machine
Ludwigsburg6926 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7141 48...
Show
+49 7141 4882799
+49 176 246...
Show
+49 176 24697022
Germany 
Germany, Pullach
Germany, Lübeck
Germany, Lübeck
Germany, Lübeck
Germany, Ludwigsburg
Germany, Pullach
Germany, Guenzburg
Spain, Barcelona
United Kingdom
United Kingdom
Germany, Pullach
Spain, Barcelona
France
Netherlands, Veghel
Netherlands, Veghel
Italy, Berlingo (BS)
Fiber laser machine parts
Year 2013
Machine hours: about 17.000 h
The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as the energy source to melt or join materials.
The laser welding cell consists of a fiber laser with a 6-axis industrial robot that moves on a guide rail.
The parts to be welded are clamped onto a rotary and tilting table.
The safety cabin is equipped with a sliding door to ensure safe working.
Technical data:
Robot:
Type M-710iC/50 (FANUC)
Robot control SYSTEM R-30iA (FANUC)
CNC control AMNC
Number of controlled axis 6
Reach 2050 mm
Welding head AMADA
Repeatability 0,07 mm
Security cabin Complete enclosure
Robotic track:
Length 1500 mm
Speed 60 m/min
Repeatability ± 0,1 mm
Positioning table:
Working height 700 mm
Max. loading weight 500 kg
Rotation axis ± 720°
Swivel axis ± 90°
Oscillator:
Beam source YLS4000-S2T
Wave length 1070 - 1080 μm
Laser power 4 kW
Control:
Type Amada
Display 15“ LCD Colour Touchscreen
Controlled axis Robot and linear axis
Coordinates between robot and laser source
Memory 3 MB SRAM
I/O Interface LAN, USB
Welding head: Amada
Focus position control -10 mm bis 50 mm
CCD camera for TAS-system included in standard
Optical Waeving included in standard
Cross Jet Nozzle included in standard
Coaxial Nozzle included in standard
Welding wire feed 0,8 to 1,6 mm
Weaving system:
The integrated rotating optics circulate the laser beam. This AMADA-patented system allows for larger gaps, with or without filler material, and even for welding aluminum.
NC focal system
The NC focus system automatically adjusts the optimal focus position for the respective welding conditions. It helps weld simple butt joints as well as hard-
to-reach corners.
Flux-cored wire and intelligent gas supply
Up to 20 kg of flux cored wire can be carried. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically.
TAS (Teach-Assistant-System)
The TAS system eliminates time-consuming manual teaching operations. Any deviation between the programmed and actual seam path is detected by a CCD camera.
Baujahr 2013
Maschinenstunden: ca. 17.000 h
Die FLW ist eine flexible und hochproduktive Laser-Schweißzelle mit umfangreicher Ausstattung. Der fokussierte Laserstrahl wird als Energiequelle eingesetzt um Materialien aufzuschmelzen bzw. miteinander zu verbinden.
Die Laser-Schweißzelle besteht aus einem Faser-Laser mit einem 6-Achsen Industrieroboter, der sich auf einer Fahrschiene bewegt.
Die zu schweißenden Teile werden auf einen Dreh- und Kipptisch gespannt.
Die Sicherheitskabine ist mit einer Schiebetüre ausgestattet gewährleistet ein sicheres Arbeiten.
Technische Daten:
Roboter:
Typ M-710iC/50 (FANUC)
Roboter-Steuerung SYSTEM R-30iA (FANUC)
CNC-Steuerung AMNC
Anzahl gesteuert Achsen 6
Reichweite 2050 mm
Schweißkopf AMADA
Wiederholgenauigkeit 0,07 mm
Sicherheitskabine Kompletteinhausung
Roboterfahrbahn:
Länge 1500 mm
Verfahrgeschwindigkeit 60 m/min
Wiederholgenauigkeit ± 0,1 mm
Positioniertisch:
Arbeitshöhe 700 mm
Max. Beladegewicht 500 kg
Drehachse ± 720°
Schwenkachse ± 90°
Resonator:
Strahlquelle YLS4000-S2T
Wellenlänge 1070 - 1080 μm
Laserleistung 4 kW
Steuerung:
Typ Amada
Display 15“ LCD Colour Touchscreen
Kontrollierte Achsen Roboter und Linearachse
Koordinaten zw. Roboter und Strahlquelle
Speicher 3 MB SRAM
I/O Interface LAN, USB
Schweißkopf: Amada
Fokuslagenregelung -10 mm bis 50 mm
CCD Kamera für TAS-System im Standard enthalten
Optisches Waeving im Standard enthalten
Cross Jet Düse im Standard enthalten
Coaxialdüse im Standard enthalten
Schweißdrahtzuführung 0,8 bis 1,6 mm
Weaving-System:
Die integrierte rotierende Optik, lässt den Laserstrahl kreisen. Das von AMADA
patentierte System erlaubt es größere Spaltmaße mit oder ohne Füllmaterial und selbst Aluminium zu schweißen.
NC-Fokus System
Das NC-Fokus System stellt automatisch die optimale Fokusposition für die jeweilige
Schweißbedingung ein. Es hilft gleichermaßen einfache Stumpfstöße wie auch schwer zugängliche Ecken zu schweißen.
Fülldraht- und intelligente Gaszufuhr
Bis zu 20 kg Fülldraht können mitgeführt werden. Bei Verwendung des TAS (Teach-Assistent-System) zieht die Gasdüse sich automatisch zurück.
TAS (Teach-Assistent-System)
Das TAS-System erübrigt zeitaufwändige manuelle Teach-Operationen. Die Abweichung des programmierten zum tatsächlichen Nahtverlauf wird über eine CCD
Kamera erkannt.