New Gecam G 135 RX sheet metal deburring machine
Wiener Neudorf7421 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+43 2236 6...
Show
+43 2236 638700
+43 2236 ...
Show
+43 2236 63662
Austria 
ca. 12 - 14 Wochen ab Auf
Italien
73800
1483.38
1350 mm
0,5 - 170 mm
1370 x 2200 mm
4000 m³/h
200 mm
6 bar
78 (+/-2) dB
1750 mm
2100 mm
2180 mm
2000 kg
WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP
Machine made of stress-free welded steel construction for stable and rigid structure.
Work table with motorised height adjustment via 4 synchronised spindles.
Independent drive motors for each work group.
Bonnets for extraction inside the machine, one per station.
Touch screen for
-Automatic star-delta connection of the main motors
- Analogue ammeter for each group
- Digital display for sheet thickness with decimal point tolerance
- Material thickness adjustment (+/- 0.1 mm)
- Machine condition monitoring with alarm messages
FEEDING SYSTEM
Robust steel structure, wear-resistant surface.
Vacuum conveyor belt on request
Variable feed speed via frequency converter 0.6 to 6.5 m/min.
Rubber conveyor belt, oil and temperature resistant
Automatic conveyor belt centring
Lateral guides to prevent the belt from lifting off.
Rubber pressure rollers in front and behind each station, oil and temperature resistant
Idle rollers at the front and rear table
1 . WORKING GROUP - R
Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating
Adjustable via eccentric shaft for working position and compensation of abrasive belt wear
Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop.
Abrasive belts and/or Scotch Brite can be used.
Motorised adjustment and electronic control of contact roll height.
Variable speed motor with automatic brake in case of emergency.
Pneumatic tensioning system for the abrasive belt.
Sanding belt centring system, with electronic photocell.
Oscillation adjustment in width and time.
Diameter of contact roller
mm
180
Hardness of the rubber wheels
Shore
55
Stroke of the contact roller adjustment up-down +quot;Grain adjustment
mm
8
Positioning accuracy of the contact roller adjustment
mm
+/- 0,02
Positioning speed of the contact roller adjustment
m/s
10
Grinding belt speed
m/s
3-18
Motor power
kW
7,5
2. WORKING GROUP - X
2 rows of vertical brushes, 10rotating clockwise and 10counterclockwise.
Transverse movement of the entire group (oscillating)
Quick change holder for brushes
Brush diameter
mm
115
Number of brushes
No
20
Oscillation stroke
mm
15
Rotation motor power
kW
5,5
Revs
1/min
1000
Oscillation motor power
kW
0,37
Grinding brush speed
m/s
10,0
ACCESSORIES:
B Group - External barrel brush Ø 150 mm
with Scotch Brite Brush
5.580,00
with Wire Brush 0,3 mm
5.900,00
R GROUP - GRINDING BELT
Motor 15 kW
1.060,00
Motor with 2 speeds 9 - 11 kW
1.830,00
Motor with 2 speeds 12 - 15 kW
2.360,00
X GROUP - CUP BRUSHES
Motor with variable speed 5,5 kW 350/1100
4.190,00
OPTIONS:
Return to Sender System (Grinding part is discharged to the front again)
1.290,00
Conveyor belt with vacuum system - 3,0 kW - 300 mm wide
4.780,00
2 additional PVC coated rollers on infeed and outfeed side
2.040,00
Tampico Brush System for parts cleaning 0,55kW Ø 150 mm
4.510,00
Tampico Brush system for conveyor belt cleaning Ø 150 mm
4.030,00
magnetic conveying system - 2 groups, 200 x 200 mm
13.520,00
Demagnetiser
4.940,00
THE MACHINE MUST BE USED WITH AN EXTRACTION DEVICE. WE RECOMMEND AN EXTRACTION SYSTEM WITH 4,000 M³/H.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lieferzeit ca. 12 - 14 Wochen ab Auf
Ursprungsland Italien
Arbeitsbreite 1350 mm
Schleifbandabmessungen 1370 x 2200 mm
Breite 2100 mm
Gewicht 2000 kg