Index MS42C metal lathe
Frankfurt
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
Show
+49 89 38031644
Germany, Bühl-Weitenung
Germany, Pullach
Germany, Pullach
€4,200
≈ $4,917
Germany, Steinheim
€3,000
≈ $3,512
Germany, Steinheim
Germany, Location:frankfurt
Germany, Location:berlin
Germany, Cologne
Germany, Location:dortmund
Germany, Bielefeld
€1,000
≈ $1,171
Germany, Huisheim
Germany, Peiting
Germany, Dormagen
Germany, Pullach
Germany, Cologne
Germany, Weißenfels
Netherlands, Rotterdam
Manufacturer
INDEX
Model
MS42C
Year of Manufacture
1998 ( Machine 1 )
2002 (machine2 )
Machine 1
Power supply: 3-phase / 50 Hz
Rated voltage: 400 V
Control voltage: 24 V
Rated current: 125 A
Rated power: 69 kW
Electrical cabinet weight: 1500 kg
Machine 2
Power supply: 3-phase / 50 Hz
Rated voltage: 400 V
Control voltage: 24 V
Rated current: 100 A
Rated power: 72 kW
Electrical cabinet weight: 1500 kg
Working area
Maximum bar diameter (bar feed
external): 42 mm
Bar feed positions: spindle positions no. 1
3
4
6
Spindle circle diameter: 320 mm
Main spindle (turning spindle)
Clamping system: Power clamping with INDEX spring-loaded hollow clamping cylinder and draw tube
Maximum clamping stroke: 4 mm
Clamping force: 26 kN
Drives
Main spindle drive (per spindle)
Motor type: Variable-speed hollow-shaft AC motor
Rated power: 8 kW
Rated speed: 2500 rpm
Power at 60% duty cycle at 2500 rpm: 12 kW
Rated torque: 32 Nm
Torque at 60% duty cycle at 2500 rpm: 41 Nm
Maximum speed: 5000 rpm
Drive for synchronous device and rotating tool holder
Motor type: Variable-speed AC motor
Rated power: 8 kW
Rated speed: 3100 rpm
Power at 25% duty cycle at 3100 rpm: 12 kW
Rated torque: 24 Nm
Torque at 25% duty cycle at 3100 rpm: 42 Nm
Maximum speed: 5000 rpm
Tool carriers
Cross units
Maximum number: 10
Maximum feed force +X: 11.4 kN
Maximum feed force -X: 7.9 kN
Maximum feed force +Z: 11.4 kN
Maximum feed force -Z: 7.9 kN
Rapid traverse speed: 15 m/min
Longitudinal units (Z-axis)
Number of longitudinal slides: 6
Z-axis travel: 240 mm
Maximum feed force +Z: 15.1 kN
Maximum feed force -Z: 11.6 kN
Rapid traverse speed: 15 m/min
Cross slides of longitudinal units (X-axis)
Maximum number: 6
X-axis travel: 70 mm
Maximum feed force +X: 11.4 kN
Maximum feed force -X: 7.9 kN
Rapid traverse speed: 15 m/min
Synchronous device
Maximum clamping diameter: 42 mm
Clamping chuck outer diameter: 112 mm
Jaw stroke: 1 mm
Maximum total clamping force: 13 kN
Pneumatics
System pressure minimum: 4 bar
System pressure maximum: 8 bar
Hydraulic system
System pressure low pressure: 40 bar
System pressure high pressure: 100 bar
Maximum flow rate pump low pressure: 40 l/min
Maximum flow rate pump high pressure: 20 l/min
Total electrical drive power: 7.5 kW
Coolant system
Flow rate: 200 l/min
Delivery pressure: 3.4 bar
Electrical drive power: 2.2 kW
Operating fluids and filling volumes
Hydraulic oil: H-LPD 32
quantity 550 l
Central lubrication oil: CG 68
quantity 6 l
Cutting oil or mineral-based emulsion: SL22–46
quantity 990 l
Dimensions
Floor space: 5.8 m²
Overall length: 8771 mm
Overall width: 2750 mm
Weights
Machine complete: 10500 kg
Bar feeder HBF complete: 2050 kg
Electrical control cabinet: 1600 kg
Find more here
show contacts
Contact us at
show contacts