Matsuura ES-450HII PC5 machining centre
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Machine Benefits
Technical Machine Benefits
Table surface height (from the floor): 1000mm
Extra Information
Traverses:
X axis (column right/left): 450mm (250 on the left, 200 on the right)
Y axis (spindle head up/down): 400mm
Z axis (pallet back/forth): 400mm (+250 when pallet is changed)
Workpiece
Distance between pallet top surface to spindle nose: 80~480mm
Distance between pallet centre to column slideways: 120~520mm
Pallet:
Working area: 300 x 300mm
Maximum load weight: 200kg
Surface tapped hole (size x quantity): M12 x P1.75 x 32mm
Table
Table indexing angle: 1 degree
Table indexing speed: 1.5 sec/90°, 1.9 sec/180°
Coupling clamp force: 27.3kN
Spindle
Spindle bearing ID: Ø70mm
Maximum spindle torque: 105/1000 minˉ1 Nm
Tool clamp force: 8.2kN
Spindle orientation: Standard (electric)
Spindle air blow: Standard
Feed Rate
Cutting federate (X/Y/Z): 1~15000mm/min
Manual continuous (jog) federate: 0~4000mm/min
Least output increment: 0.001mm
Automatic Tool Changer
Pull stud type: JIS B 6339 pull stud 40P
Tool storage: 30 pcs
Method of tool selection: Addresses code & random selection bi-directional magazine rotation. (T4)
Tool change time (tool to tool): 1.5 sec (less than 6kg), 2.0 sec (more than 6kg)
Tool change time (chip to chip): 3.2 sec
Tool pot pitch: 95.25mm
Automatic Pallet Changer
Number of pallets: 2
Pallet change system: Turn-table method
Pallet change time: 8.5 sec
Pallet change time (pallet to pallet): 9.0 sec
Pallet clamp force: 41.5kN
Pallet weight/piece: 40kg
Pallet size: 300 x 300mm
Maximum load weight: 200kg
Motors
Spindle motor: Alpha T8/1500 AC 11.0/7.5kW (30min./continuous rate)
Feed motors:
X Axis: model α 22/3000 AC 4.4kW
Y Axis: model α 22/2000 with brake AC 4.4kW
Z Axis: model α 22/3000 AC 4.4kW
Hydraulic motor: AC 1.5kW
Lubrication motor: AC 0.02kW
Coolant motor: AC 0.75kW
Required Power Capacity
Total electric capacity: 34KVA
Air source: 0.54~0.93MPa
Air capacity: 400 L/min
Hydraulic tank capacity: 15L
Lubrication tank capacity: 2.7L
Coolant tank capacity: 200L
Standard Attachments
Tool enclosure guard (with top cover)
Chip flow
Synchronized tap
Spindle oil cooler
Spindle overload protection
Feed axis interface prevention device
Work light (fluorescent light)
M code counter (9 kinds)
Through spindle coolant
Spindle probe interface (no probe)
Filtermist
Swarf conveyor
Manuals
application type: Milling
Location: Germany
machine type: Horizontal Machining Centre
Machine Depth: 3600 mm
Number of Axes: 4
Max. Tool Weight: 8 kg