Ermak HGS 3100-8 guillotine shear
Ahaus6623 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 2561 9...
Show
+49 2561 938471
+49 2561 9...
Show
+49 2561 938436
Germany 
Germany, Ahaus
Germany, Ahaus
Germany, Ahaus
Germany, Pullach
Germany, Location:berlin
Germany, Guenzburg
Germany, Guenzburg
Germany, Ahaus
Germany, Guenzburg
Germany, Ahaus
Germany, Guenzburg
Germany, Ahaus
Germany, Ahaus
Germany, Guenzburg
Germany, Guenzburg
Germany, Guenzburg
Germany, Location:berlin
Germany, Ahaus
Germany, Ahaus
plate thickness 8.0 mm
thickness at "Niro-steel" 6.0 mm
down holder 14 Stück
no. of strokes 20 Hub/min
cutting angle 1.2 °
control ELGO "P9521"
work height max. 800 mm
oil volume 150 ltr.
total power requirement 15.0 kW
weight 7000 kg
range L-W-H 3900 x 2300 x 1600 mm
** Current new price approx. 40.000 Euro
** Special price upon request
Equipment:
- NC electro-hydraulic swing beam shear
- ELGO NC control unit "P9521", front left
- NC electro-motorized backgauge
* Travel range = 5.0 - 1,000 mm (X axis)
* On recirculating ball screws
* Positioning accuracy 0.1 mm
* Travel speed 80.0 mm/sec.
- Manual lateral cutting gap adjustment
- 1x side stop, with T-slot and mm scale
- 2x front support arms, with T-slot and mm scale
- Ball transfer units in the front support table
- Hinged finger guard with safety switch
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- 1x freely movable foot switch
- 2x front emergency stop buttons
- Rear safety guard
- Operating instructions (PDF)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hubzahl 20 Hub/min
Steuerung ELGO "P9521"
Gesamtleistungsbedarf 15.0 kW
Gewicht 7000 kg
Abmessung L-B-H 3900 x 2300 x 1600 mm
** aktueller Neupreis ca. 40.000 Euro
** Sonderpreis auf Anfrage
Ausstattung:
- NC elektro-hydraulische Schwingschnittschere
- ELGO NC Steuerungseinheit "P9521", vorne links
- NC elektro-motorischer Hinteranschlag
* Verfahrweg = 5.0 - 1.000 mm (X Achse)
* auf Kugelumlaufspindeln
* Positioniergenauigkeit 0.1 mm
* Verfahr-Geschwindigkeit 80.0 mm/sek.
- manuelle - seitliche Schnittspaltverstellung
- 1x Seitenanschlag, mit T-Nut und mm-Skala
- 2x vordere Auflegearme, mit T-Nut und mm-Skala
- Kugelrollen im vorderen Auflagetisch
- aufklappbarer Fingerschutz, mit Sicherheitsschalter
- BOSCH/HOERBIGER Hydraulikanlage
- SIEMENS-Elektroanlage
- 1x freibewegliche Fussschalter
- 2x NOT Aus Taster vorne
- hintere Schutzeinrichtung
- Bedienungsanleitung (PDF)