Kraemer Elektronik UTS 4.1 other laboratory equipment
Janville6490 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+33 2 37 90...
Show
+33 2 37 90 28 78
+33 6 85 75...
Show
+33 6 85 75 93 89
France 
France, Janville
France, Janville
France, Janville
France, Béthune
France, Limay
France, Limay
France, Béthune
France, Saint Victoret
France, Brie-Comte-Robert
France, Brie-Comte-Robert
France, Saint-Chamond
France, Neuville-Saint-Amand
France, CHASSENEUIL-DU-POITOU
France, Épernay
€902
≈ $1,043
France, Hazebrouck
Automatic tablet testing system
- Laboratory measuring equipment
- Tablet tool
Enables testing of:
Hardness
Diameter
Thickness
Weight
Precision balance Sartorius WZ64S
Scale : 10 à 50 g
Unit : mg / 0,5 mg / 0,1 mg adjustable
Thickness
Drive: stepper motor.
Measuring principle: linear potentiometer.
Unit of measurement: mm or inch.
Tolerance: +/- 0.1 mm
Hardness
Drive: stepper motor.
Measurement: load cell (lmz)
Measurement principle: dynamometric gauge
Unit: N, Kp or Sc
Diameter
Drive: stepper motor.
Measuring principle: stepper motor.
Unit of measurement: mm or inch.
Scale: 3 - 18 mm / 3 - 30 mm (manual)
Tolerance: +/- 0.1 mm
Tension : 100 / 240 V, 50Hz / 60 Hz
The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry.
The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated.
All parts requiring cleaning can be removed quickly and easily without any tools.
The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations.
Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.
Système de test automatique des comprimés
- Matériel de mesure pour laboratoire
- Outil pour comprimés
Permet de tester :
Dureté
Diamètre
Épaisseur
Poids
Balance de précision Sartorius WZ64S
Echelle : 10 à 50 g
Unité : mg / 0,5 mg / 0,1 mg réglable
Epaisseur
Entrainement : moteur pas à pas.
Principe de mesure : Potentiomètre linéaire.
Unité de mesure : mm ou inch.
Tolérance ; +/- à,1 mm
Dureté
Entrainement : moteur pas à pas.
Prise de mesure : Cellule de mesure de charge (lmz)
Principe de mesure : Jauge dynamométrique
Unité : N, Kp ou Sc
Diamètre
Entrainement : moteur pas à pas.
Principe de mesure : moteur pas à pas.
Unité de mesure : mm ou inch.
Echelle : 3 - 18 mm / 3 - 30 mm (manuel)
Tolérance : +/- 0,1 mm
Tension : 100 / 240 V, 50Hz / 60 Hz
L'UTS est un système de test universel et entièrement automatisé développé pour être utilisé dans l'industrie. Cet outil est le modèle approuvé d'une série de systèmes d'essai testés pendant de nombreuses années. Il a été développé en étroite collaboration avec l'industrie pharmaceutique.
L'UTS 4.1 permet de tester des comprimés ronds, ovales, carrés et oblongs, ainsi que de nombreuses formes spéciales. Pour les comprimés oblongs délicats, le système de centrage oblong (OZB), qui a fait ses preuves, peut être intégré.
Toutes les pièces nécessitant un nettoyage peuvent être retirées rapidement et facilement sans aucun outil.
Le système d'essai peut être complété par diverses options, telles qu'un distributeur et/ou un collecteur d'échantillons avec un nombre différent de stations.
Utilisez l'UTS comme un testeur de laboratoire ou un dispositif de contrôle en ligne connecté à une presse à comprimés. L'échantillonnage peut être déclenché soit dans la machine de production, soit à l'aide du logiciel TTS11.