Verified seller 
Spinner TC65-MC metal lathe for sale by auction
Mühldorf Am Inn
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€4,900
≈ $5,701
Germany, Euskirchen
€6,000
≈ $6,980
Germany, Tholey
€2,500
≈ $2,909
Germany, Tholey
€2,500
≈ $2,909
Germany, Tholey
€2,500
≈ $2,909
Germany, Tholey
€2,500
≈ $2,909
Germany, Tholey
€3,500
≈ $4,072
Germany, Rüsselsheim
€3,000
≈ $3,490
Germany, Tholey
€950
≈ $1,105
Germany, Rüsselsheim
€1,500
≈ $1,745
Germany, Euskirchen
€20,000
≈ $23,270
Germany, Tholey
€2,900
≈ $3,374
Germany, Euskirchen
€1,500
≈ $1,745
Germany, Euskirchen
Rotary ø [max.]: 310 mm
Turning length [max.]: 600 mm
Main spindle:
Technology: Belt spindle
Speed (max.): 4,500 rpm
Power (max.): 16.5 kW
Torque (max.): 280 Nm
Bar Passage: 65 mm
Workpiece clamping: Collet chuck, Eroglu HPA 60/8
Tool carrier (X/Z):
Technology: 12-station turret, every 2nd driven
Tool holder: VDI30
Tool drive: 4,000 rpm, 6 kW, 9.5 Nm
Travel in X/Z: 230/640 mm
Rapid traverse in X/Z: 15/22.5 m/min
Equipment/accessories:
Chip management: Chip conveyor
Coolant management: coolant pump
Raw material feed: Short bar loader, LNS Eco Load (not in operation)
Precast Removal: Parts Collection Tray with Conveyor Belt
Chuck: 3-jaw chuck, SMW Autoblok 250 HB
Tool holders: Div. gebr. Tool Holder
Dreh-ø [max.]: 310 mm
Drehlänge [max.]: 600 mm
Hauptspindel:
Technologie: Riemenspindel
Drehzahl (max.): 4.500 U/min
Leistung (max.): 16,5 kW
Drehmoment (max.): 280 Nm
Stangendurchlass: 65 mm
Werkstückspannung: Spannzangenfutter, Eroglu HPA 60/8
Werkzeugträger (X/Z):
Technologie: Revolver mit 12 Stationen, jede 2te angetrieben
Werkzeugaufnahme: VDI30
Werkzeugantrieb: 4.000 U/min, 6 kW, 9,5 Nm
Verfahrweg in X/Z: 230/640 mm
Eilgang in X/Z: 15/22,5 m/min
Ausstattung/Zubehör:
Spänemanagement: Späneförderer
Kühlmittelmanagement: KSS-Pumpe
Rohmaterialzufuhr: Kurzstangenlader, LNS Eco Load (nicht in Betrieb)
Fertigteilabfuhr: Teilefangschale mit Förderband
Spannfutter: 3-Backenfutter, SMW Autoblok 250 HB
Werkzeugaufnahmen: Div. gebr. Werkzeughalter
Steuerung: Siemens 810D - ShopTurn
Dreh-ø [max.]: 310 mm
Drehlänge [max.]: 600 mm
Technologie: Riemenspindel
Drehzahl (max.): 4.500 U/min
Leistung (max.): 16,5 kW
Drehmoment (max.): 280 Nm
Stangendurchlass: 65 mm
Werkstückspannung: Spannzangenfutter, Eroglu HPA 60/8
Werkzeugaufnahme: VDI30
Werkzeugantrieb: 4.000 U/min, 6 kW, 9,5 Nm
Verfahrweg in X/Z: 230/640 mm
Eilgang in X/Z: 15/22,5 m/min
Spänemanagement: Späneförderer
Kühlmittelmanagement: KSS-Pumpe
Rohmaterialzufuhr: Kurzstangenlader, LNS Eco Load (nicht in Betrieb)
Fertigteilabfuhr: Teilefangschale mit Förderband
Spannfutter: 3-Backenfutter, SMW Autoblok 250 HB
Werkzeugaufnahmen: Div. gebr. Werkzeughalter
Länge: 5500
Höhe: 1800
Breite: 2000
Hauptspindel
Werkzeugträger (X/Z)
Technologie: Revolver mit 12 Stationen
jede 2te angetrieben
Ausstattung/Zubehör
Rotatorio ø [máx.]: 310 mm
Longitud de torneo [máx.]: 600 mm
Husillo principal:
Tecnología: Husillo
de cinta
Velocidad (máxima): 4.500 rpm
Potencia (máx.): 16,5 kW
Par motor (máximo): 280 Nm
Paso de barra: 65 mm
Sujeción de la pieza: Portabrocas de collet, Eroglu HPA 60/8
Portaherramientas (X/Z):
Tecnología: torreta de 12 estaciones, cada segunda motorizada
Portaherramientas: VDI30
Accionamiento de herramientas: 4.000 rpm, 6 kW, 9,5 Nm
Recorrido en X/Z: 230/640 mm
Recorrido rápido en X/Z: 15/22,5 m/min
Equipamiento/accesorios:
Gestión de astillas: Transportadora
de astillas
Gestión del refrigerante: bomba
de refrigerante
Alimentación de materias primas: Cargador de barras cortas, LNS Eco Load (no en funcionamiento)
Retirada de prefabricados: bandeja de recogida de piezas con cinta
transportadora
Chuck: mandril de 3 mandíbulas, SMW Autoblok 250 HB
Portaherramientas: Div. gebr. Portaherramientas
Pyörivä ø [maks.]: 310 mm
Kääntöpituus [maksimi]: 600 mm
Pääakseli:
Teknologia: Hihnakara
Nopeus (maksimi): 4 500 rpm
Teho (maksimi): 16,5 kW
Vääntömomentti (maksimi): 280 Nm
Tangon läpikäynti: 65 mm
Työkappaleen puristus: Collet chuck, Eroglu HPA 60/8
Työkalun kantaja (X/Z):
Teknologia: 12-asemainen torni, joka toinen ohjattu
Työkaluteline: VDI30
Työkaluveto: 4 000 rpm, 6 kW, 9,5 Nm
Matkanopeus X/Z:ssä: 230/640 mm
Nopea kierto X/Z-luokassa: 15/22,5 m/min
Varusteet/tarvikkeet:
Sirun hallinta: Lastukuljetin
Jäähdytysnesteen hallinta: jäähdytysnestepumppu
Raaka-aineen syöttö: Lyhyt tankokuormaaja, LNS Eco Load (ei käytössä)
Esivalmistettu poisto: Osien keräysalusta kuljetushihnalla
Chuck: 3-leukainen Chuck, SMW Autoblok 250 HB
Työkalujen pidikkeet: Div. gebr. Työkalupidike
Rotatif ø [max.] : 310 mm
Longueur de tournage [max.] : 600 mm
Axe principal :
Technologie : Broche
à bande
Vitesse (max.) : 4 500 tr/min
Puissance (max.) : 16,5 kW
couple (max.) : 280 Nm
Passage de barre : 65 mm
Serrage de la pièce : mandrin Collet, Eroglu HPA 60/8
Porte-outils (X/Z) :
Technologie : tourelle à 12 stations, toutes les deux entraînées
Porte-outil : VDI30
Entraînement de l’outil : 4 000 tr/min, 6 kW, 9,5 Nm
Course en X/Z : 230/640 mm
Traversée rapide en X/Z : 15/22,5 m/min
Équipement/accessoires :
Gestion des puces : Convoyeur
à puces
Gestion du liquide de refroidissement : pompe
à liquide de refroidissement
Alimentation en matières premières : chargeuse à barres courtes, LNS Eco Load (non en service)
Retrait préfabriqué : bac de collecte des pièces avec tapis
roulants
Chuck : mandiller à 3 mâchoires, SMW Autoblok 250 HB
Porte-outils : Div. gebr. Porte-outil
Rotante ø [max.]: 310 mm
Lunghezza di rotazione [max.]: 600 mm
Fuso principale:
Tecnologia: Fuso
a nastro
Velocità (max.): 4.500 giri/min
Potenza (max.): 16,5 kW
Coppia (max.): 280 Nm
Passaggio a barre: 65 mm
Serratura del pezzo: mandrino Collet, Eroglu HPA 60/8
Portautensili (X/Z):
Tecnologia: torretta a 12 postazioni, ogni seconda motorizzata
Portautensili: VDI30
Trasmissione utensile: 4.000 giri/min, 6 kW, 9,5 Nm
Corsa in X/Z: 230/640 mm
Traversata rapida in X/Z: 15/22,5 m/min
Equipaggiamento/accessori:
Gestione dei chipelli: Trasportatore
di trucioli
Gestione del liquido refrigerante: pompa
del liquido refrigerante
Alimentazione materie prime: caricatore a barra corta, LNS Eco Load (non in funzione)
Rimozione prefabbricata: vassoio di raccolta parti con nastro
trasportatore
Chuck: Chuck a 3 mascelle, SMW Autoblok 250 HB
Portaattrezzi: Div. gebr. Portaattrezzi
Rotary ø [max.]: 310 mm
Draailengte [max.]: 600 mm
Hoofdspil:
Technologie: Riemspil
Snelheid (max): 4.500 tpm
Vermogen (max.): 16,5 kW
Koppel (max.): 280 Nm
Zanddoorgang: 65 mm
Werkstukklem: Spantang, Eroglu HPA 60/8
Gereedschapsdrager (X/Z):
Technologie: 12-stations toren, elke tweede aangedreven
Gereedschapshouder: VDI30
Gereedschapsaandrijving: 4.000 tpm, 6 kW, 9,5 Nm
Beweging in X/Z: 230/640 mm
Snelle traverse in X/Z: 15/22,5 m/min
Uitrusting/accessoires:
Chipbeheer: Chiptransporteur
Koelvloeistofbeheer: koelvloeistofpomp
Grondstoffenvoering: Short bar loader, LNS Eco Load (niet in gebruik)
Voorafgemonteerde verwijdering: Onderdelenverzamelbak met transportband
Boorboor: 3-kaak boorhamer, SMW Autoblok 250 HB
Gereedschapshouders: Div. gebr. Gereedschapshouder
Obrotowe ø [maks.]: 310 mm
Długość toczenia [maks.]: 600 mm
Główne wrzeciono:
Technologia: Wrzeciono
taśmowe
Prędkość (maks.): 4 500 obr./min
Moc (maks.): 16,5 kW
Moment obrotowy (maksymalny): 280 Nm
Przejście prętowe: 65 mm
Zaciskanie obrabianego elementu: Kołkowa kołka, Eroglu HPA 60/8
Nośnik narzędzi (X/Z):
Technologia: 12-stacjonowa wieża, każda druga sterowana
Uchwyt narzędziowy: VDI30
Napęd narzędziowy: 4000 obr./min, 6 kW, 9,5 Nm
Ruch w X/Z: 230/640 mm
Szybki obrót w X/Z: 15/22,5 m/min
Sprzęt/akcesoria:
Zarządzanie wiórami: Przenośnik
wiórowy
Zarządzanie płynem chłodzącym: pompa
chłodzenia
Surowcowa zasob: ładowarka krótkociągowa, LNS Eco Load (nie działa)
Usuwanie prefabrykowanych części: Taca na części z taśmą
przenośniczkową
Chuck: 3-szczękowy uchwyt, SMW Autoblok 250 HB
Uchwyty narzędzi: Dywizja Gebr. Uchwyt narzędziowy
Rotativă ø [max.]: 310 mm
Lungimea de rotire [maxim]: 600 mm
Axul principal:
Tehnologie: Fus
de bandă
Viteză (maxim): 4.500 rpm
Putere (maxim): 16,5 kW
Cuplu (maxim): 280 Nm
Pasaj de bară: 65 mm
Prinderea piesei de prelucr: Mandrină Collet, Eroglu HPA 60/8
Suport pentru scule (X/Z):
Tehnologie: turelă cu 12 stații, fiecare a doua antrenare
Suport pentru scule: VDI30
Acționare a uneltelor: 4.000 rpm, 6 kW, 9,5 Nm
Cursă în X/Z: 230/640 mm
Traversare rapidă în X/Z: 15/22,5 m/min
Echipament/accesorii:
Managementul cipurilor: Transportor
de cipuri
Managementul lichidului de răcire: pompa
de lichid de răcire
Alimentare cu materii prime: încărcător cu bare scurte, LNS Eco Load (nu este în funcțiune)
Îndepărtare prefabricate: Tavă de colectare a pieselor cu bandă
transportoare
Chuck: Chuck cu 3 maxilare, SMW Autoblok 250 HB
Suporturi pentru unelte: Div. gebr. Suport pentru scule
Roterande ø [max.]: 310 mm
Vändlängd [max.]: 600 mm
Huvudspindel:
Teknik: Bältesspindel
Hastighet (max): 4 500 varv per minut
Effekt (max): 16,5 kW
Vridmoment (max): 280 Nm
Bar Passage: 65 mm
Arbetsstyckets klämning: Collet-chuck, Eroglu HPA 60/8
Verktygsbärare (X/Z):
Teknologi: 12-stationers torn, var andra drivna
Verktygshållare: VDI30
Verktygsdrift: 4 000 varv/min, 6 kW, 9,5 Nm
Rörelse i X/Z: 230/640 mm
Snabb travers i X/Z: 15/22,5 m/min
Utrustning/tillbehör:
Chiphantering: Chiptransportör
Kylvätskehantering: kylvätskepump
Råmaterialmatning: Kortlastare, LNS Eco Load (ej i drift)
Borttagning av prefabricerade: Deluppsamlingsbricka med transportband
Chuck: 3-käks chuck, SMW Autoblok 250 HB
Verktygshållare: Div. gebr. Verktygshållare